1. Turn the power off.

Reinhart Electric will go find your circuit breaker(s) and cut the power to your exterior facing electrical outlets. Reinhart Electric will be sure to test your outlet to see if the power is really off. Getting zapped is no fun.

2. Remove the outlet cover.

Reinhart Electric will grab a standard flat head screwdriver and remove the electrical outlet cover. Any simple multi-bit screwdriver should have a bit that will work.

3. a foam gasket.

Standard insulating foam gaskets, Reinhart Electric pop the center piece and screw holes out. And then place the gasket over your outlet for maximum insulating savings.

Foam gaskets can help prevent heat from leaking outside in the winter and cool air from escaping through the outlets in the hot summer months.

4. Replace outlet cover.

Reinhart Electric will place the outlet cover over the foam gasket and use screwdriver screw cover back in place.